315 Kva Oil-filled Transformer

315 Kva Oil-filled Transformer

Details
• Coil Material: Copper
• Primary Voltage: 11kV
• Working Efficiency: 50HZ
• Sealed type oil immersed distribution transformer
• Low loss transformer
Category
Oil-Filled Transformer
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

 

The 315 kVA oil-filled transformer is an industrial-grade power distribution unit built for high-efficiency medium-voltage step-down applications. Constructed with high-permeability silicon steel cores and high-purity windings, it delivers low losses and superior thermal performance. Encased in a hermetically sealed, anti-corrosive tank, the unit features integrated protection and control fittings to ensure operational stability, maintenance-free reliability, and full compliance with international grid standards.

 

 

 

Technical Specifications

 

Parameter

Standard Specification

Product Name

500 kVA Oil-Filled Transformer

Transformer Type

Three-Phase Oil-Filled Distribution Transformer

Rated Capacity

500 kVA

Number of Phases

Three-phase

Rated Frequency

50 Hz

Rated Primary Voltage

11 kV

Rated Secondary Voltage

0.415 kV

HV Tapping Range

±2 × 2.5%, 5 positions

Tap-Changing Method

De-energized tap changing

Vector Group

Dyn11

Short-Circuit Impedance

4.5%

No-Load Current

≤1.5%

Cooling Method

ONAN

Insulating Liquid

PCB-free mineral insulating oil

Winding Material

Copper

Core Material

Cold-rolled grain-oriented silicon steel

Winding Temperature Rise

65 K

Tank Construction

Hermetically sealed corrugated tank or radiator tank

Protection and Monitoring

Pressure-relief device, liquid-level indication, oil-temperature indication, and earthing terminals

Installation

Outdoor installation, continuous duty

Service Conditions

Maximum ambient temperature: 40°C; maximum altitude: 1,000 m

Certification Standards

Available according to IEC, IEEE/ANSI, DOE (where applicable), CSA, CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes

 

 

 

Advantages of CHBEB 315 kVA Oil-Filled Transformer

 

CHBEB 315 kVA oil-filled transformers are engineered for high-efficiency, low-loss power distribution in medium-scale electrification projects.

Optimized Grid Efficiency & Low TCO

Designed to exceed standard efficiency benchmarks, the unit minimizes technical losses and cuts idling power consumption under no-load conditions. This core optimization significantly lowers the Total Cost of Ownership (TCO) across its 30-year operational lifespan.

Step-Lap CRGO Core Technology

Utilizing high-grade Cold Rolled Grain Oriented (CRGO) silicon steel assembled with step-lap stacking, the smooth magnetic flux path reduces magnetostriction to keep noise levels below 55 dB. The precision-cut laminations also lower excitation current and improve system power factor.

Robust Thermal Stability & Overload Protection

High-purity windings insulated with diamond-patterned epoxy paper (DDP) cure into a rigid block that resists mechanical stress during short circuits. Computer-designed oil circulation channels eliminate internal hot spots to maintain long-term thermal stability.

1
Newly Arrived Steel Tank Enclosure for 315 kVA Oil-Filled Transformer
2
315 kVA Oil-Filled Transformer Prepared for Factory Performance Testing
3
Completed 315 kVA Oil-Filled Transformer Ready for Final Truck Loading
4
Schematic Diagram of the Structure of CHBEB 315 kVA Oil-Filled Transformer

 

 

 

Applications of 315 kVA Oil Immersed Transformer

 

• Commercial Real Estate & High-Rises
Serving as the primary power supply for mid-sized shopping plazas, commercial complexes, and residential high-rises to handle fluctuating occupancy loads efficiently.
• Public Infrastructure & Municipal Facilities
Powering heavy-duty municipal water treatment pumps, sewage facilities, and large street lighting control centers with high reliability.
• Renewable Energy Integration
Acting as a dependable step-down or collector unit for medium-sized solar PV arrays and regional renewable power generation blocks.
• Urban Commercial Buildings & Offices
Providing continuous electrification for multi-tenant office towers where low no-load losses make idling power consumption highly cost-effective.
• Industrial Manufacturing Workshops
Delivering stable medium-voltage step-down power for localized assembly lines, specialized machinery, and manufacturing plant auxiliary systems.
• Hospitality and Leisure Resorts
Supplying uninterrupted power distribution across expansive resort properties, hotels, and entertainment complexes with variable daily load profiles.
• Transportation and Railway Stations
Powering regional transit hubs, platform lighting systems, and signaling control facilities to ensure safe and continuous operational flow.
• EV Charging Hubs & Infrastructure
Supporting high-capacity commercial electric vehicle charging stations by providing stable voltage regulation and reliable grid connection.
5
315 kVA step-up transformer installed in a ground-mounted solar PV farm.

 

 

 

Quality Control & Testing Engineering of CHBEB Oil-Filled Transformers

 

Every CHBEB oil-filled transformer undergoes rigorous, end-to-end quality assurance to guarantee optimal thermal stability, low losses, and uncompromising operational safety under continuous industrial loads.

Incoming Material Verification

We source high-grade raw materials exclusively from certified global leaders, including Baowu Steel for high-permeability grain-oriented silicon steel and DuPont Nomex for thermal insulation. Every batch of silicon steel, copper conductors, and insulating oil undergoes incoming inspections for magnetic core loss, purity, and dielectric strength in strict compliance with GB/T 2521 and IEC 60641 standards.

In-Process Manufacturing Control

Core laminations are processed on automated CNC shearing lines using step-lap stacking techniques to maintain high dimensional tolerances, minimizing no-load losses and noise. Windings are executed on automated tension-controlled winding machines to ensure tight mechanical rigidity, turn-to-turn insulation integrity, and high resistance against severe short-circuit electrodynamic forces.

Vacuum Drying & Degassed Oil Filling

To eliminate moisture and micro-voids, the active core-and-coil assembly undergoes an intensive vacuum drying cycle prior to tanking. High-dielectric mineral oil is thoroughly filtered, degassed, and injected under deep vacuum conditions, achieving ultra-low partial discharge levels and extending internal insulation lifespan.

Factory Testing & Global Certification

Every completed unit undergoes 100% mandatory factory routine testing in accordance with IEC 60076 and IEEE C57.12.00 standards-including insulation resistance, voltage ratio, impedance, impulse withstand, and seal integrity tests. Backed by KEMA, CQC, ISO 9001, ISO 14001, and CE certifications, approved transformers are securely packed in heavy-duty export packaging for seamless worldwide dispatch.

11
Insulation Resistance Test
12
Insulation Resistance Test
13
Insulation Resistance Test
14
Oil Pressure and Seal Tightness Test

 

 

 

Why Choose CHBEB for Your Global Electrical Projects

 

As a premier manufacturer of medium- and high-voltage power equipment, CHBEB Power delivers high-reliability grid infrastructure and proven engineering excellence to clients worldwide.

Tailored Engineering & Customization

We deliver end-to-end bespoke solutions tailored to specific project requirements and regional grid codes. Our engineering team customizes core specifications-including voltage ratios, impedance levels, vector groups, enclosure protection ratings, and special anti-corrosion coatings-ensuring seamless integration into unique operating environments.

Global Distributor & Partner Ecosystem

We build long-term, high-growth partnerships with global distributors, EPC contractors, and equipment dealers. CHBEB provides flexible OEM/ODM collaboration, competitive direct-factory pricing, priority lead times, and full technical documentation to empower our local partners in winning tenders and expanding market share.

End-to-End Manufacturing & Authority

Operating from our state-of-the-art 30,000+ square meter production base, we maintain total control over every step of fabrication-from precision CNC core lamination to automated winding and deep-vacuum oil processing. This complete in-house manufacturing capability guarantees superior structural integrity, tight lead times, and continuous supply chain stability.

International Compliance & Certification

Our products strictly adhere to international engineering standards, including IEC 60076, IEEE C57, ANSI, and GB. Fully accredited with ISO 9001, ISO 14001, ISO 45001, CE, and independent KEMA type testing, CHBEB equipment delivers field-proven reliability, maximum grid resilience, and long-term operating safety.

 

 

 

FAQ

 

Q: What should I check about the Dyn11 vector group and 4.0% impedance before ordering?

A: The 315 kVA model uses a Dyn11 vector group and 4.0% impedance voltage. These parameters affect phase relationships, fault-current levels, and system compatibility. For replacement or parallel operation, verify the vector group, voltage ratio, and impedance.

Q: What core construction is used to improve the efficiency of the 315 kVA transformer?

A: The listed configuration uses high-grade Hi-B CRGO silicon steel with step-lap stacking, supporting a smoother magnetic flux path, lower no-load losses, and reduced operating noise. Diamond-patterned epoxy paper (DDP) insulation helps stabilize the winding structure.

Q: Are copper and aluminum winding options available for the 315 kVA transformer?

A: Yes. Both copper and aluminum windings are available. The choice depends on the project's electrical design, budget, and operating requirements. Specify the preferred material when requesting a quotation.

Q: What cooling method and insulating oil are used in the 315 kVA model?

A: The standard cooling method is ONAN, using natural oil circulation and air cooling. The listed configuration uses PCB-free mineral insulating oil for electrical insulation and heat transfer. Special requirements should be confirmed before production.

Q: Can the tap settings and installation details be confirmed before production?

A: Yes. The listed configuration includes an off-circuit tap changer. Buyers should confirm the required tap range and adjustment steps, then review dimensional drawings, terminal arrangements, and factory testing requirements before approving the technical documents.

Q: What is the minimum order quantity and delivery time for the 315 kVA transformer?

A: The MOQ is 10 units. Standard production typically takes 3–6 weeks, with some configurations ready within 30 days. Expedited production may take as little as one week, subject to technical confirmation, material availability, and factory capacity.

 

 

Hot Tags: 315 kva oil-filled transformer, China 315 kva oil-filled transformer manufacturers, suppliers, factory, 100 Kva Oil-filled Transformer, 3750 Kva Oil-filled Transformer, 6000 Kva Oil-filled Transformer, 500 Kva Oil-filled Transformer, 4000 Kva Oil-filled Transformer, 1250 Kva Oil-filled Transformer

Powering the World with Premium Transformer Solutions

As a leading Chinese transformer manufacturer with decades of expertise, CHBEB proudly serves clients across 17 countries and counting. Our global footprint expands continuously as we:

  • Deliver customized power solutions for more than 10 international projects
  • Support over 20 trusted distributors worldwide
  • Manufacture reliable low-voltage transformers with 60+ years of technical excellence

Let's energize your next power project with Chinese precision and global reliability.

Get in Touch with CHBEB

Leave a message for more information about our products series, and request a quote or expert advice.