630 Kva Oil-filled Transformer

630 Kva Oil-filled Transformer

Details
• Coil Material: Copper
• Primary Voltage: 11kV
• Working Efficiency: 50HZ
• Oil immersed distribution transformer
• Low loss transformer
Category
Oil-Filled Transformer
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

 

The 630 kVA oil-immersed transformer features a high-efficiency magnetic core and precision windings, delivering exceptional thermal stability and minimal core losses. Built in strict compliance with IEC standards, its hermetically sealed tank design integrates advanced cooling fins and high-dielectric mineral oil to ensure superior heat dissipation and robust insulation. Equipped with reliable tap changers and multi-stage pressure relief systems, the unit offers long-term structural durability, quiet operation, and reliable performance under heavy electrical loads.

 

 

 

Technical Specifications

 

Parameter

Standard Specification

Product Name

630 kVA Oil-Filled Transformer

Transformer Type

Three-Phase Oil-Filled Distribution Transformer

Rated Capacity

630 kVA

Number of Phases

Three-phase

Rated Frequency

50 Hz

Rated Primary Voltage

11 kV

Rated Secondary Voltage

0.415 kV

HV Tapping Range

±2 × 2.5%, 5 positions

Tap-Changing Method

De-energized tap changing

Vector Group

Dyn11

Short-Circuit Impedance

4.5%

No-Load Current

≤1.4%

Cooling Method

ONAN

Insulating Liquid

PCB-free mineral insulating oil

Winding Material

Copper

Core Material

Cold-rolled grain-oriented silicon steel

Winding Temperature Rise

65 K

Tank Construction

Hermetically sealed corrugated tank or radiator tank

Protection and Monitoring

Pressure-relief device, liquid-level indication, oil-temperature indication, and earthing terminals

Installation

Outdoor installation, continuous duty

Service Conditions

Maximum ambient temperature: 40°C; maximum altitude: 1,000 m

Certification Standards

Available according to IEC, IEEE/ANSI, DOE (where applicable), CSA, CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes

 

 

 

Advantages of CHBEB 630 kVA Oil Immersed Transformer

 

CHBEB 630 kVA oil immersed transformers are engineered for heavy-duty industrial power distribution and demanding substation environments.

The Industrial Powerhouse Standard

This unit bridges the gap between utility grid supply and large-scale facility consumption, specifically engineered to handle the dynamic load profiles and frequent current surges typical of automated factories and large motor startups.

Enhanced Short-Circuit Impedance

Optimized with a standard impedance of 4.5% (customizable up to 5%), the unit acts as a natural choke during downstream short circuits to significantly limit fault current magnitude and protect low-voltage switchgear from mechanical damage.

Component Upgrades & Accessories

Incorporating active maintenance accessories such as a dehydrating breather to remove moisture and a dial-type Oil Temperature Indicator (OTI) with electrical contacts to trigger alarms, the unit ensures decades of reliable service.

Robust Tank Construction

Reinforced with rigid steel channels and deeper corrugated fins made from thicker gauge steel, the tank supports the heavier core and coil assembly while preventing excessive flexing during lifting or transport operations.

6
Finished 630 kVA Oil-Filled Transformer Prepared for Secure Truck Loading
7
Controlled Oven-Drying Process for 630 kVA Oil-Filled Transformer Components
8
630 kVA Oil-Filled Transformer
9
Detailed Technical Nameplate with Rated Specifications for 630 kVA Oil-Filled Transformer
10
Schematic Diagram of the Structure of CHBEB 630 kVA Oil-Filled Transformer

 

 

 

Applications of 630 kVA Oil Immersed Transformer

 

• Industrial Automation
Powering robotic assembly lines, high-precision CNC machining centers, and automated manufacturing cells with stable, heavy-duty electrical output.
• Data Centers
Serving as the primary feed for high-density server cooling systems, power distribution units, and continuous uninterruptible power supply (UPS) inputs.
• Commercial Complexes
Delivering reliable 800A+ continuous current support for large-scale supermarkets, multi-story office towers, and high-occupancy retail hubs.
• Renewable Energy Integration
Stepping down or conditioning power generated from solar or wind energy collection arrays for safe local distribution or grid feeding.
• Large-Scale Warehousing & Logistics Hubs
Powering automated sorting systems, heavy conveying equipment, and high-bay material handling machinery around the clock.
• Water and Wastewater Treatment Facilities
Ensuring uninterrupted, high-reliability power delivery for heavy-duty municipal pumping stations and continuous filtration processes.
• Chemical & Processing Plants
Providing robust, continuous power distribution capable of withstanding demanding industrial environments and complex electrical load profiles.
• Municipal Infrastructure & Transport Terminals
Supplying stable medium-to-low voltage conversion for transit hubs, lighting grids, and essential public service facilities.
11
630 kVA oil immersed transformer installed in a data center powering server cooling systems.

 

 

 

Quality Control & Testing Engineering of CHBEB Oil-Filled Transformers

 

Every CHBEB oil-filled transformer undergoes rigorous, end-to-end quality assurance to guarantee optimal thermal stability, low losses, and uncompromising operational safety under continuous industrial loads.

Incoming Material Verification

We source high-grade raw materials exclusively from certified global leaders, including Baowu Steel for high-permeability grain-oriented silicon steel and DuPont Nomex for thermal insulation. Every batch of silicon steel, copper conductors, and insulating oil undergoes incoming inspections for magnetic core loss, purity, and dielectric strength in strict compliance with GB/T 2521 and IEC 60641 standards.

In-Process Manufacturing Control

Core laminations are processed on automated CNC shearing lines using step-lap stacking techniques to maintain high dimensional tolerances, minimizing no-load losses and noise. Windings are executed on automated tension-controlled winding machines to ensure tight mechanical rigidity, turn-to-turn insulation integrity, and high resistance against severe short-circuit electrodynamic forces.

Vacuum Drying & Degassed Oil Filling

To eliminate moisture and micro-voids, the active core-and-coil assembly undergoes an intensive vacuum drying cycle prior to tanking. High-dielectric mineral oil is thoroughly filtered, degassed, and injected under deep vacuum conditions, achieving ultra-low partial discharge levels and extending internal insulation lifespan.

Factory Testing & Global Certification

Every completed unit undergoes 100% mandatory factory routine testing in accordance with IEC 60076 and IEEE C57.12.00 standards-including insulation resistance, voltage ratio, impedance, impulse withstand, and seal integrity tests. Backed by KEMA, CQC, ISO 9001, ISO 14001, and CE certifications, approved transformers are securely packed in heavy-duty export packaging for seamless worldwide dispatch.

11
Insulation Resistance Test
12
Insulation Resistance Test
13
Insulation Resistance Test
14
Oil Pressure and Seal Tightness Test

 

 

 

Why Choose CHBEB for Your Global Electrical Projects

 

As a premier manufacturer of medium- and high-voltage power equipment, CHBEB Power delivers high-reliability grid infrastructure and proven engineering excellence to clients worldwide.

Tailored Engineering & Customization

We deliver end-to-end bespoke solutions tailored to specific project requirements and regional grid codes. Our engineering team customizes core specifications-including voltage ratios, impedance levels, vector groups, enclosure protection ratings, and special anti-corrosion coatings-ensuring seamless integration into unique operating environments.

Global Distributor & Partner Ecosystem

We build long-term, high-growth partnerships with global distributors, EPC contractors, and equipment dealers. CHBEB provides flexible OEM/ODM collaboration, competitive direct-factory pricing, priority lead times, and full technical documentation to empower our local partners in winning tenders and expanding market share.

End-to-End Manufacturing & Authority

Operating from our state-of-the-art 30,000+ square meter production base, we maintain total control over every step of fabrication-from precision CNC core lamination to automated winding and deep-vacuum oil processing. This complete in-house manufacturing capability guarantees superior structural integrity, tight lead times, and continuous supply chain stability.

International Compliance & Certification

Our products strictly adhere to international engineering standards, including IEC 60076, IEEE C57, ANSI, and GB. Fully accredited with ISO 9001, ISO 14001, ISO 45001, CE, and independent KEMA type testing, CHBEB equipment delivers field-proven reliability, maximum grid resilience, and long-term operating safety.

 

 

 

FAQ

 

Q: How can I determine whether a 630 kVA transformer is suitable for my facility?

A: Consider the facility's maximum demand, load characteristics, and expected capacity expansion. For industrial projects, also check motor starting currents and simultaneous equipment operation to confirm whether 630 kVA provides sufficient capacity and load margin.

Q: Why does the 630 kVA transformer use a 4.5% impedance voltage?

A: The standard impedance voltage is 4.5%, with customization up to 5%. A higher impedance helps limit downstream short-circuit current and reduce stress on switchgear and busbars. The final value should match system calculations and protection settings.

Q: Can I choose between copper and aluminum windings for this transformer?

A: Yes. Both copper and aluminum windings are available. The choice depends on electrical requirements, budget, and design considerations. Buyers should confirm the preferred material when requesting a quotation.

Q: What cooling and monitoring accessories can be configured for the 630 kVA model?

A: The standard cooling method is ONAN (Oil Natural Air Natural). Accessories such as a silica-gel breather and an oil temperature indicator (OTI) with electrical contacts are also available, depending on project requirements.

Q: What technical information should I provide when requesting a quotation?

A: Provide the rated capacity, primary and secondary voltages, frequency, impedance, vector group, and installation conditions. Load characteristics, tap settings, connection arrangements, and required accessories also help the engineering team prepare an accurate proposal.

Q: What factory tests are performed before the 630 kVA transformer is shipped?

A: Each transformer undergoes factory testing to check electrical performance and operating safety. Tests may include electrical and withstand-voltage checks according to agreed requirements. Buyers should confirm any additional inspections or test records before production.

Q: What is the MOQ and production lead time for a 630 kVA oil-filled transformer?

A: The MOQ is 10 units. Standard orders typically require 3–6 weeks, with some configurations ready within 30 days. Expedited production may take as little as one week, subject to configuration, material availability, and factory capacity.

 

 

Hot Tags: 630 kva oil-filled transformer, China 630 kva oil-filled transformer manufacturers, suppliers, factory, 100 Kva Oil-filled Transformer, 3750 Kva Oil-filled Transformer, 6000 Kva Oil-filled Transformer, 500 Kva Oil-filled Transformer, 4000 Kva Oil-filled Transformer, 1250 Kva Oil-filled Transformer

Powering the World with Premium Transformer Solutions

As a leading Chinese transformer manufacturer with decades of expertise, CHBEB proudly serves clients across 17 countries and counting. Our global footprint expands continuously as we:

  • Deliver customized power solutions for more than 10 international projects
  • Support over 20 trusted distributors worldwide
  • Manufacture reliable low-voltage transformers with 60+ years of technical excellence

Let's energize your next power project with Chinese precision and global reliability.

Get in Touch with CHBEB

Leave a message for more information about our products series, and request a quote or expert advice.