200 Kva Oil-filled Transformer

200 Kva Oil-filled Transformer

Details
• Coil Material: Copper
• Primary Voltage: 11kV
• Working Efficiency: 50HZ
• Sealed type oil immersed distribution transformer
• Low loss transformer
Category
Oil-Filled Transformer
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

 

The CHBEB 200 kVA oil-immersed distribution transformer is built around a fully enclosed, hermetically sealed corrugated tank that completely isolates the internal insulating oil from atmospheric oxygen and moisture. By eliminating the traditional conservator tank and dehydrating breathers, CHBEB's maintenance-free architecture prevents oil oxidation and dielectric breakdown-the primary drivers of internal insulation decay. Combined with high-permeability, step-lap silicon steel cores and precision-wound copper coils, this unit delivers high dynamic short-circuit strength, minimal no-load losses, and long-term voltage stability across demanding distribution networks.

 

 

 

Technical Specifications

 

Parameter

Standard Specification

Product Name

200 kVA Oil-Filled Transformer

Transformer Type

Three-Phase Oil-Filled Distribution Transformer

Rated Capacity

200 kVA

Number of Phases

Three-phase

Rated Frequency

50 Hz

Rated Primary Voltage

11 kV

Rated Secondary Voltage

0.415 kV

HV Tapping Range

±2 × 2.5%, 5 positions

Tap-Changing Method

De-energized tap changing

Vector Group

Dyn11

Short-Circuit Impedance

4.0%

No-Load Current

≤1.8%

Cooling Method

ONAN

Insulating Liquid

PCB-free mineral insulating oil

Winding Material

Copper

Core Material

Cold-rolled grain-oriented silicon steel

Winding Temperature Rise

65 K

Tank Construction

Hermetically sealed corrugated tank or radiator tank

Protection and Monitoring

Pressure-relief device, liquid-level indication, oil-temperature indication, and earthing terminals

Installation

Outdoor installation, continuous duty

Service Conditions

Maximum ambient temperature: 40°C; maximum altitude: 1,000 m

Certification Standards

Available according to IEC, IEEE/ANSI, DOE (where applicable), CSA, CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes

 

 

 

Advantages of CHBEB 200 kVA Oil Immersed Transformer

 

CHBEB 200 kVA oil immersed transformers are engineered for maintenance-free operation and high structural reliability in medium-to-low voltage power distribution.

Elastic Tank Technology

The flexible corrugated fins act as a thermal lung, expanding and contracting to absorb oil volume changes across ambient temperatures ranging from -25°C to +40°C. Tested to withstand 0.25 bar overpressure without permanent deformation, this sealed architecture prevents atmospheric contact and eliminates periodic oil maintenance.

High-Precision Core Mechanics

Utilizing Cold Rolled Grain Oriented (CRGO) silicon steel stacked with mitered joints, the core structure significantly reduces magnetostriction and operating noise. A specialized internal clamping frame secures the active assembly, preventing core or coil displacement during transport and severe short-circuit events.

Integrated Fault & Pressure Protection

Designed for decades of sealed operation, the tank is equipped with an integrated pressure relief valve (PRV) as a standard safety feature. The PRV safely vents internal overpressure in the event of a system fault, protecting the sealed tank integrity and safeguarding surrounding equipment.

1
Copper Winding Structure and Assembly Details for 200 kVA Oil-Filled Transformer
2
Finished 200 kVA Oil-Filled Transformer Ready for Truck Loading
3
Transformer Core No-Load Loss Testing for 200 kVA Oil-Filled Transformer
4
Schematic Diagram of the Structure of CHBEB 200 kVA Oil-Filled Transformer

 

 

 

Applications of 200 kVA Oil Immersed Transformer

 

• Commercial & Retail Buildings
Providing steady step-down power distribution for lighting, HVAC systems, and commercial refrigeration networks.
• Small-to-Medium Workshops
Delivering stable energy supply for localized production machinery, motor drives, and light industrial equipment.
• Urban Residential Districts
Serving as a compact step-down unit for neighborhood power distribution and underground utility networks.
• Agricultural Pumping Stations
Supplying continuous, low-maintenance power for high-capacity irrigation pumps and rural agricultural infrastructure.
• Distributed Solar Projects
Integrating small-to-medium rooftop or ground-mounted PV generation blocks into local distribution grids.
• EV Charging Stations
Converting medium-voltage power to feed multiple fast-charging hubs and fleet charging infrastructure.
• Telecommunication Infrastructure
Ensuring uninterruptible, reliable power supply for remote base stations and regional communication hubs.
• Public Infrastructure & Utilities
Powering municipal street lighting networks, water pumping facilities, and public service buildings.
5
200 kVA hermetically sealed transformer installed inside a compact prefabricated substation.

 

 

 

CHBEB 20000 kVA Oil-Filled Transformer Quality Control and Electrical Testing Standards

 

CHBEB applies a structured quality management framework to ensure high performance, safety, and compliance across every manufacturing stage.

Rigorous Raw Material & Core-Component Screening

CHBEB enforces strict incoming quality control to guarantee component integrity before assembly begins.

  • Material Qualification: High-permeability grain-oriented silicon steel sheets and insulation materials are verified in accordance with international standards.
  • Component Verification: Key structural components and materials undergo strict incoming inspection prior to production.
  • Process & Insulation Control: Core lamination precision and winding withstand voltages are managed under strict manufacturing process controls.

Full-Spectrum Routine & Type Testing Protocol

Every unit undergoes comprehensive factory testing in our advanced testing laboratory prior to dispatch.

  • Electrical Performance Testing: Comprehensive checks covering winding resistance, voltage ratio, and tap position tests.
  • Loss & Insulation Validation: Precise measurement of no-load/load losses and insulation resistance under standard operational conditions.
  • Advanced Dielectric & Safety Checks: Specialized partial discharge (PD) tests, withstand voltage tests, and oil pressure/seal tightness verification following IEC 60076 and GB 1094 standards.

Traceability & Third-Party Testing Compliance

CHBEB ensures reliable quality verification backed by internationally recognized authorities.

  • In-House Quality Team: Monitored by a professional quality inspection team certified under standardized management systems.
  • Third-Party Testing: Independently tested and certified by internationally recognized authorities such as KEMA (Netherlands) and CQC.
  • International Certifications: Manufactured and managed under certified ISO 9001, ISO 14001, and ISO 45001 systems with CE compliance for global market requirements.
1
Insulation Resistance Test
2
Insulation Resistance Test
3
Insulation Resistance Test
4
Oil Pressure and Seal Tightness Test

 

 

 

CHBEB Customer Support, Engineering Customization and After-Sales Services

 

CHBEB provides comprehensive engineering, flexible manufacturing, and long-term technical support to ensure seamless project execution.

Tailored Engineering & OEM/ODM
Customization

CHBEB provides tailored transformer solutions engineered to match specific site conditions, grid codes, and operational demands.

  • Flexible Technical Customization: Capacity, voltage levels, cooling types, and structural layouts adapted to exact project specs.
  • Design & Drawing Review: Thorough review of technical drawings and parameters by our engineering team prior to production.
  • Complete OEM/ODM Services: Production options ranging from standard model modifications to custom design from basic concept.

Flexible Manufacturing & Production
Timelines

CHBEB optimizes factory scheduling and supply chain logistics to meet tight project schedules and urgent supply demands.

  • Standard Production Lead Time: Standard orders are manufactured and prepared for dispatch within 30 days (3 to 6 weeks).
  • Expedited Order Response: Urgent project requirements can be prioritized with accelerated lead times as short as 1 week.
  • Global Supply Readiness: Efficient dispatch coordination for international EPC projects, utility buyers, and regional distributors.

Comprehensive Warranty & Lifecycle Technical
Support

CHBEB delivers long-term equipment protection and continuous engineering support across the entire operational lifespan.

  • Tiered Warranty Coverage: Complete transformer units are backed by a 3-year warranty, with accessories covered for 2 years.
  • Lifecycle Technical Assistance: Remote installation guidance, commissioning support, and troubleshooting provided by specialized engineers.
  • 24/7 Technical Response: Continuous after-sales support guarantees rapid response to ensure uninterrupted equipment operation.

 

 

 

FAQ

 

Q: What is the minimum order quantity (MOQ) for 200 kVA oil-filled transformers?

A: The MOQ is 10 units. We support bulk purchasing requirements from distributors, electrical contractors, and power distribution project buyers.

Q: What information is needed to request a quotation for a 200 kVA oil-filled transformer?

A: Buyers should provide the required primary and secondary voltages, frequency, phase configuration, connection requirements, order quantity, and delivery destination. A technical specification sheet or project datasheet can also help clarify the required configuration.

Q: Can the specifications of a 200 kVA oil-filled transformer be customized?

A: Yes. Depending on the project requirements, customization may involve primary and secondary voltages, vector group, impedance, tap changer options, cooling configuration, bushings, and other accessories. Final specifications are subject to technical confirmation.

Q: What is the customization process?

A: CHBEB's standard customization process consists of six stages: Requirement Analysis → Technical Proposal & Quotation → Detailed Engineering Design → Manufacturing & Quality Control → Packaging & Logistics → Commissioning & After-Sales Support.

Q: How do I select the appropriate voltage configuration for a 200 kVA oil-filled transformer?

A: The primary voltage should match the incoming power supply, while the secondary voltage should meet the requirements of the downstream distribution system. Buyers should also confirm the frequency, phase configuration, and connection requirements before placing an order.

Q: What should I check when receiving a 200 kVA oil-filled transformer?

A: Check the external condition of the transformer, compare the nameplate information with the confirmed order specifications, and verify the supplied accessories and product documentation. Any visible damage or specification discrepancies should be reported before installation.

 

 

Hot Tags: 200 kva oil-filled transformer, China 200 kva oil-filled transformer manufacturers, suppliers, factory, 100 Kva Oil-filled Transformer, 3750 Kva Oil-filled Transformer, 6000 Kva Oil-filled Transformer, 500 Kva Oil-filled Transformer, 4000 Kva Oil-filled Transformer, 1250 Kva Oil-filled Transformer

Powering the World with Premium Transformer Solutions

As a leading Chinese transformer manufacturer with decades of expertise, CHBEB proudly serves clients across 17 countries and counting. Our global footprint expands continuously as we:

  • Deliver customized power solutions for more than 10 international projects
  • Support over 20 trusted distributors worldwide
  • Manufacture reliable low-voltage transformers with 60+ years of technical excellence

Let's energize your next power project with Chinese precision and global reliability.

Get in Touch with CHBEB

Leave a message for more information about our products series, and request a quote or expert advice.