Product Overview
The 80 kVA pad-mounted transformer is a three-phase oil-immersed distribution transformer designed for residential and light commercial power distribution. Its pad-mounted construction provides a compact ground-level solution for localized power distribution, combining practical outdoor installation with reliable voltage transformation and low-maintenance operation.
Technical Specifications
|
Parameter |
Specification |
|
Product Name |
80 kVA Pad-Mounted Three-Phase Oil-Immersed Distribution Transformer |
|
Transformer Type |
Three-Phase Oil-Filled Pad-Mounted Compartmental-Type Distribution Transformer |
|
Rated Capacity |
80 kVA |
|
Number of Phases |
Three-phase |
|
Rated Frequency |
60 Hz |
|
Rated Primary Voltage |
13.2 kV |
|
Rated Secondary Voltage |
480Y/277 V |
|
HV Tapping Range |
±2 × 2.5%, 5 positions |
|
Tap-Changing Method |
De-energized tap changing |
|
Vector Group |
Dyn1, delta-wye with neutral |
|
Short-Circuit Impedance |
3% |
|
No-Load Current |
≤1.8% |
|
Cooling Method |
ONAN |
|
Insulating Liquid |
PCB-free mineral insulating oil |
|
Winding Material |
Aluminum |
|
Core Material |
Cold-rolled grain-oriented silicon steel |
|
Winding Temperature Rise |
65 K |
|
Primary Feed Arrangement |
Loop-feed arrangement with four-position load-break switch |
|
HV Terminal Arrangement |
Dead-front bushing wells with separable insulated connectors |
|
LV Terminal Arrangement |
Spade terminals or busbar connections with neutral terminal |
|
Protection Arrangement |
Bay-O-Net fuse, backup current-limiting fuse, surge arrester, and pressure-relief device |
|
Enclosure Construction |
Hermetically sealed compartmental tamper-resistant enclosure with lockable HV and LV doors |
|
Installation |
Outdoor concrete-pad installation, continuous duty |
|
Service Conditions |
Maximum ambient temperature: 40°C; maximum altitude: 1,000 m |
|
Certification Standards |
Available according to IEC, IEEE/ANSI, DOE (where applicable), CSA, CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes |
Advantages of CHBEB 80 kVA Pad-Mounted Transformer
The 80 kVA pad-mounted transformer combines a compact structure, fully sealed insulation, and flexible high-voltage connections for practical power distribution installations.
Compact Space-Saving Structure
The transformer features a compact structure with a volume of approximately 1/3 to 1/5 that of comparable domestic European-style box-type substations with the same capacity. This reduced footprint helps minimize required floor space where installation area is limited.
Fully Sealed Insulated Structure
The fully sealed and insulated construction requires no additional insulation distance around exposed energized components, helping simplify installation while providing reliable personal safety protection during operation.
Flexible High-Voltage Connections
The high-voltage side supports both loop-network and terminal connections, allowing the power supply configuration to be selected according to the distribution scheme. This flexibility accommodates different network arrangements while maintaining a practical transformer configuration.
Product Diagrams
Dimensional & Installation Drawings




Detailed Views






Packing and Shipping



Customize 80 kVA Pad-Mounted Transformer for Your Distribution Project
CHBEB provides configurable electrical, structural, protection, and documentation options to match project-specific distribution requirements.
- Electrical Ratings - Customize rated capacity, primary and secondary voltage, frequency, impedance, and tap configuration according to project requirements.
- Winding & Core Materials - Select copper or aluminum windings and suitable core materials according to required electrical performance and specifications.
- Protection & Enclosure - Configure fuse protection, bushing arrangements, cabinet access, and weather-resistant enclosure requirements.
- Mounting & Dimensions - Adapt pad-mounted dimensions, cable entry arrangements, compartment configuration, and other structural details to suit installation conditions.
- Testing & Documentation - Provide project-specific testing, technical drawings, nameplate information, and inspection documents according to customer or utility requirements.
- Branding & Packaging - Customize nameplates, labels, packaging marks, and shipping packaging according to branding and delivery requirements.

Quality Assurance & Testing by CHBEB for Transformer Manufacturing
CHBEB applies quality controls throughout production and testing to ensure consistent product quality and reliability.
Incoming Material Inspection
Check silicon steel core loss, insulation material thermal class, and other key material properties before production, with testing aligned with GB/T 2521 and IEC 60641.
01
Production Process Control
Control core lamination precision, winding quality, and turn-to-turn withstand voltage during manufacturing, following applicable JB/T 501 and IEEE C57.12.00 requirements.
02
In-Factory Quality Testing
Verify voltage ratio, winding resistance, load and no-load losses, impedance voltage, insulation resistance, withstand voltage, oil tightness, and other key parameters in accordance with applicable IEC 60076 and GB 1094.11 requirements.
03
Third-Party Testing
Support independent testing and certification through recognized organizations such as KEMA and CQC for applicable transformer projects.
04
Why Choose CHBEB as Your Transformer Manufacturer
CHBEB brings extensive experience and established manufacturing resources to transformer projects worldwide.
69+ Years of Manufacturing Experience
Founded in 1956, CHBEB has more than 69 years of experience in power and specialty transformer manufacturing, serving power transmission and distribution applications in different markets.
Three Self-Owned Manufacturing Bases
CHBEB operates three self-owned manufacturing bases: No. 211, Wei 16 Road, Yueqing, Zhejiang; Xiangyang Industrial Zone, Yueqing, Zhejiang; and No. 7, Xiangfeng Road, Jiangning District, Nanjing, Jiangsu. The facilities span over 100 acres with an annual production value of RMB 3 billion.
Engineering & Technical Support
CHBEB provides technical drawings and engineering support for transformer projects, allowing buyers to confirm electrical specifications, product dimensions, and installation requirements before production.
Green Manufacturing
CHBEB uses automated precision equipment to reduce material waste and energy consumption while integrating clean energy into its manufacturing facilities. Our supply chain also emphasizes responsibly sourced transformer materials.
Comprehensive Service Support from CHBEB for Your Transformer Projects
CHBEB provides practical support from technical evaluation and project coordination to delivery and after-sales service.
Technical Support & Free Design Drawings
CHBEB provides technical assistance and drawings to help customers confirm transformer specifications and equipment requirements before production.
Support includes:
• Free technical drawings for project evaluationa
• Transformer specification and selection support
• Electrical and installation requirement consultation
• Product dimension and interface confirmation
• Responsive technical communication
Fast Production & Logistics Support
CHBEB coordinates production and shipment according to project schedules, product requirements, and delivery conditions.
Support includes:
• Standard lead time of 3–6 weeks
• Expedited delivery available within 1 week
• Production scheduling based on project requirements
• Export packaging for transformer transportation
• Shipping and logistics coordination
After-Sales & Lifecycle Support
CHBEB provides technical assistance and warranty coverage to support reliable transformer operation throughout its service life.
After-sales support includes:
• 3-year warranty for complete transformers
• 2-year warranty for spare parts
• Free lifecycle maintenance guidance
• Installation and commissioning guidance
• Technical troubleshooting and operation support
FAQ
Q: What is the minimum order quantity for the 80 kVA pad-mounted transformer?
A: The MOQ is 1 unit, so buyers can order a single transformer for project evaluation, replacement, or specific distribution requirements.
Q: Can the 80 kVA pad-mounted transformer be supplied with matching accessories?
A: Yes. CHBEB can provide compatible transformer accessories and connection components according to the selected configuration and project requirements.
Q: What information should I provide when requesting a quotation?
A: Please provide the required capacity, voltage requirements, frequency, connection configuration, quantity, and destination. CHBEB can then confirm the suitable transformer configuration and quotation.
Q: Can CHBEB provide drawings before production?
A: Yes. CHBEB provides technical drawings for confirming product dimensions, interfaces, and installation requirements before production.
Q: What maintenance is required for an oil-immersed pad-mounted transformer?
A: Routine maintenance generally includes checking oil condition, connections, bushings, enclosure condition, and other key components according to the applicable maintenance schedule and operating conditions.
Q: How is the transformer prepared for international shipment?
A: CHBEB uses export-oriented packaging and coordinates shipping arrangements according to the transformer configuration, destination, and transportation requirements.
Hot Tags: 80 kva pad mount three-phase oil-immersed distribution transformer, China 80 kva pad mount three-phase oil-immersed distribution transformer manufacturers, suppliers, factory, 2500 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, 167 kva pad mount transformer, 5000 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, Single Phase Pad Mounted Transformer (URD Series), 1000 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, 25 kva pad mount transformer
