315 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer

315 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer

Details
• Coil Material: Copper/Aluminum
• Primary Voltage: 13.2 kV
• Working Efficiency: 60HZ
• Pad mounted distribution transformers
• Three-Phase
Category
Pad Mounted Transformer
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

 

The 315 kVA pad mounted transformer is a three-phase, oil-immersed distribution transformer designed to step down medium voltage for reliable underground power distribution. With a 315 kVA rated capacity, it provides a modest capacity margin when serving a 300 kVA load, corresponding to approximately 95% loading at the rated load condition. Operating below full rated capacity can reduce thermal stress on the windings and insulation system, supporting more stable operating temperatures and helping limit insulation aging over long-term service.

 

 

 

Technical Specifications

 

Parameter

Specification

Product Name

315 kVA Pad-Mounted Three-Phase Oil-Immersed Distribution Transformer

Transformer Type

Three-Phase Oil-Filled Pad-Mounted Compartmental-Type Distribution Transformer

Rated Capacity

315 kVA

Number of Phases

Three-phase

Rated Frequency

60 Hz

Rated Primary Voltage

13.2 kV

Rated Secondary Voltage

480Y/277 V

HV Tapping Range

±2 × 2.5%, 5 positions

Tap-Changing Method

De-energized tap changing

Vector Group

Dyn1, delta-wye with neutral

Short-Circuit Impedance

4%

No-Load Current

≤1.3%

Cooling Method

ONAN

Insulating Liquid

PCB-free mineral insulating oil

Winding Material

Aluminum

Core Material

Cold-rolled grain-oriented silicon steel

Winding Temperature Rise

65 K

Primary Feed Arrangement

Loop-feed arrangement with four-position load-break switch

HV Terminal Arrangement

Dead-front bushing wells with separable insulated connectors

LV Terminal Arrangement

Spade terminals or busbar connections with neutral terminal

Protection Arrangement

Bay-O-Net fuse, backup current-limiting fuse, surge arrester, and pressure-relief device

Enclosure Construction

Hermetically sealed compartmental tamper-resistant enclosure with lockable HV and LV doors

Installation

Outdoor concrete-pad installation, continuous duty

Service Conditions

Maximum ambient temperature: 40°C; maximum altitude: 1,000 m

Certification Standards

Available according to IEC, IEEE/ANSI, DOE (where applicable), CSA, CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes

 

 

 

Advantages of CHBEB 315 kVA Pad Mounted Transformer

 

CHBEB 315 kVA pad mounted transformers are engineered for long-term operational reliability and safety in demanding underground distribution environments.

Corrosion-Resistant Hybrid Construction

The cabinet base and sill are fabricated using 304L stainless steel to satisfy the stringent requirements of ANSI C57.12.29. This hybrid construction prevents rust from spreading even if the surface coating is scratched during installation, ensuring decades of oil containment integrity in harsh industrial or coastal environments.

Dead-Front Safety Architecture

The high-voltage compartment utilizes fully shielded and insulated elbow connectors to eliminate exposed live conductors. This dead-front design significantly minimizes electrocution risks for operators during routine maintenance while restricting unauthorized access via tamper-resistant enclosure features.

Loop Feed Configuration

Equipped with a loop-feed bushing arrangement and an internal 4-position load break switch, the unit acts as a flexible pass-through node within a ring distribution system. This setup allows grid operators to quickly re-route power and isolate circuit faults, minimizing downtime during maintenance or cable failure.

 

 

 

Typical Application Context

 

  • Retail Chains & Supermarkets
  • High-Density Urban Developments
  • Coastal Properties & Marine Resorts
  • Commercial Office Buildings

 

  • EV Charging Stations
  • Industrial Parks & Factories
  • Residential Subdivisions (URD)
  • Institutional & Healthcare Campuses
1

315 kVA pad mounted transformer powering a coastal

condominium complex.

 

 

 

Customize 315 kVA Pad-Mounted Transformer for Your Distribution Project

 

CHBEB provides configurable electrical, structural, protection, and documentation options to match project-specific distribution requirements.

 

  • Electrical Ratings - Customize rated capacity, primary and secondary voltage, frequency, impedance, and tap configuration according to project requirements.
  • Winding & Core Materials - Select copper or aluminum windings and suitable core materials according to required electrical performance and specifications.
  • Protection & Enclosure - Configure fuse protection, bushing arrangements, cabinet access, and weather-resistant enclosure requirements.
  • Mounting & Dimensions - Adapt pad-mounted dimensions, cable entry arrangements, compartment configuration, and other structural details to suit installation conditions.
  • Testing & Documentation - Provide project-specific testing, technical drawings, nameplate information, and inspection documents according to customer or utility requirements.
  • Branding & Packaging - Customize nameplates, labels, packaging marks, and shipping packaging according to branding and delivery requirements.

 

Discover More Custom Options Customize Your Transformer

Customation

 

 

 

Quality Assurance & Testing by CHBEB for Transformer Manufacturing

 

CHBEB applies quality controls throughout production and testing to ensure consistent product quality and reliability.

 

Incoming Material Inspection

Check silicon steel core loss, insulation material thermal class, and other key material properties before production, with testing aligned with GB/T 2521 and IEC 60641.

01

Production Process Control

Control core lamination precision, winding quality, and turn-to-turn withstand voltage during manufacturing, following applicable JB/T 501 and IEEE C57.12.00 requirements.

02

In-Factory Quality Testing

Verify voltage ratio, winding resistance, load and no-load losses, impedance voltage, insulation resistance, withstand voltage, oil tightness, and other key parameters in accordance with applicable IEC 60076 and GB 1094.11 requirements.

03

Third-Party Testing

Support independent testing and certification through recognized organizations such as KEMA and CQC for applicable transformer projects.

04

 

 

 

Why Choose CHBEB as Your Transformer Manufacturer

 

CHBEB brings extensive experience and established manufacturing resources to transformer projects worldwide.

69+ Years of Manufacturing Experience

Founded in 1956, CHBEB has more than 69 years of experience in power and specialty transformer manufacturing, serving power transmission and distribution applications in different markets.

Three Self-Owned Manufacturing Bases

CHBEB operates three self-owned manufacturing bases: No. 211, Wei 16 Road, Yueqing, Zhejiang; Xiangyang Industrial Zone, Yueqing, Zhejiang; and No. 7, Xiangfeng Road, Jiangning District, Nanjing, Jiangsu. The facilities span over 100 acres with an annual production value of RMB 3 billion.

Engineering & Technical Support

CHBEB provides technical drawings and engineering support for transformer projects, allowing buyers to confirm electrical specifications, product dimensions, and installation requirements before production.

Green Manufacturing

CHBEB uses automated precision equipment to reduce material waste and energy consumption while integrating clean energy into its manufacturing facilities. Our supply chain also emphasizes responsibly sourced transformer materials.

 

 

 

Comprehensive Service Support from CHBEB for Your Transformer Projects

 

CHBEB provides practical support from technical evaluation and project coordination to delivery and after-sales service.

Technical Support & Free Design Drawings

CHBEB provides technical assistance and drawings to help customers confirm transformer specifications and equipment requirements before production.
Support includes:
• Free technical drawings for project evaluationa
• Transformer specification and selection support
• Electrical and installation requirement consultation
• Product dimension and interface confirmation
• Responsive technical communication

Fast Production & Logistics Support

CHBEB coordinates production and shipment according to project schedules, product requirements, and delivery conditions.
Support includes:
• Standard lead time of 3–6 weeks
• Expedited delivery available within 1 week
• Production scheduling based on project requirements
• Export packaging for transformer transportation
• Shipping and logistics coordination

After-Sales & Lifecycle Support

CHBEB provides technical assistance and warranty coverage to support reliable transformer operation throughout its service life.
After-sales support includes:
• 3-year warranty for complete transformers
• 2-year warranty for spare parts
• Free lifecycle maintenance guidance
• Installation and commissioning guidance
• Technical troubleshooting and operation support

 

 

 

FAQ

 

Q: What is the minimum order quantity for the 315 kVA Pad Mounted Transformer?

A: The MOQ is 1 unit, making it suitable for both single-project requirements and larger distribution orders.

Q: Can the 315 kVA transformer be supplied with project-specific drawings?

A: Yes. CHBEB can provide technical drawings and product dimensions for specification review and installation planning before production.

Q: What information is required to select the right 315 kVA configuration?

A: Key requirements include primary voltage, secondary voltage, frequency, impedance, tap configuration, winding material, and protection requirements.

Q: How is the transformer packaged for international shipment?

A: CHBEB provides export packaging and coordinates shipping and logistics according to the transformer configuration and delivery requirements.

Q: Can the 315 kVA transformer be tested by a third party before shipment?

A: Yes. Independent testing and certification through recognized organizations such as KEMA and CQC can be supported for applicable projects.

Q: What support is available after the transformer is delivered?

A: CHBEB provides installation and commissioning guidance, lifecycle maintenance guidance, and technical troubleshooting support, together with a 3-year warranty for complete transformers.

 

 

Hot Tags: 315 kva pad mount three-phase oil-immersed distribution transformer, China 315 kva pad mount three-phase oil-immersed distribution transformer manufacturers, suppliers, factory, 2500 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, 167 kva pad mount transformer, 5000 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, Single Phase Pad Mounted Transformer (URD Series), 1000 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, 25 kva pad mount transformer

Powering the World with Premium Transformer Solutions

As a leading Chinese transformer manufacturer with decades of expertise, CHBEB proudly serves clients across 17 countries and counting. Our global footprint expands continuously as we:

  • Deliver customized power solutions for more than 10 international projects
  • Support over 20 trusted distributors worldwide
  • Manufacture reliable low-voltage transformers with 60+ years of technical excellence

Let's energize your next power project with Chinese precision and global reliability.

Get in Touch with CHBEB

Leave a message for more information about our products series, and request a quote or expert advice.