Product Overview
The 2500 kVA pad-mounted transformer delivers 2.5 MVA rated capacity with a three-phase oil-immersed design for high-current power distribution. Designed for low-voltage outputs such as 480V, it can deliver approximately 3,000A at rated load, while ANSI-compliant live-front or dead-front configurations support different connection and safety requirements. Standardized enclosure dimensions can also help simplify replacement and integration with existing pad-mounted installations when the specified design matches the original unit.
Technical Specifications
|
Parameter |
Standard Specification |
|
Product Name |
2500 kVA Pad-Mounted Three-Phase Oil-Immersed Distribution Transformer |
|
Transformer Type |
Three-Phase Oil-Filled Pad-Mounted Compartmental-Type Distribution Transformer |
|
Rated Capacity |
2500 kVA |
|
Number of Phases |
Three-phase |
|
Rated Frequency |
60 Hz |
|
Rated Primary Voltage |
13.2 kV |
|
Rated Secondary Voltage |
480Y/277 V |
|
HV Tapping Range |
±2 × 2.5%, 5 positions |
|
Tap-Changing Method |
De-energized tap changing |
|
Vector Group |
Dyn1, delta-wye with neutral |
|
Short-Circuit Impedance |
5.75% |
|
No-Load Current |
≤0.7% |
|
Cooling Method |
ONAN |
|
Insulating Liquid |
PCB-free mineral insulating oil |
|
Winding Material |
Aluminum |
|
Core Material |
Cold-rolled grain-oriented silicon steel |
|
Winding Temperature Rise |
65 K |
|
Primary Feed Arrangement |
Loop-feed arrangement with four-position load-break switch |
|
HV Terminal Arrangement |
Dead-front bushing wells with separable insulated connectors |
|
LV Terminal Arrangement |
Spade terminals or busbar connections with neutral terminal |
|
Protection Arrangement |
Bay-O-Net fuse, backup current-limiting fuse, surge arrester, and pressure-relief device |
|
Enclosure Construction |
Hermetically sealed compartmental tamper-resistant enclosure with lockable HV and LV doors |
|
Installation |
Outdoor concrete-pad installation, continuous duty |
|
Service Conditions |
Maximum ambient temperature: 40°C; maximum altitude: 1,000 m |
|
Certification Standards |
Available according to IEC, IEEE/ANSI, DOE (where applicable), CSA, CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes |
Advantages of CHBEB 2500 kVA Pad Mounted Transformer
CHBEB 2500 kVA pad mounted transformers combine efficient heat dissipation, configurable insulating fluids, and flexible distribution network integration to meet demanding power distribution requirements.
Flexible Distribution Network Integration
The 2500 kVA pad mounted transformer can serve as a centralized power source for large residential developments, supporting connections to a 480V main bus ductor a localized underground distribution network. For subdivision projects, the distribution layout can be designed to supply multiple downstream step-down transformers, helping engineers organize power distribution across different buildings and load centers.
Efficient Natural Cooling
The oil-immersed design uses corrugated tank walls to increase the surface area available for heat dissipation. This supports natural oil and air cooling (ONAN) without relying on external cooling fans, helping reduce auxiliary power consumption and avoid fan-related maintenance. Actual cooling performance depends on the selected design and specified temperature-rise rating.
Configurable Insulating Fluid
The transformer can be specified with different insulating fluids to meet project requirements. Natural ester fluidoffers a higher fire point than conventional mineral oil, making it a consideration for installations where fire safety is a priority. The appropriate fluid should be selected according to the project's environmental conditions, fire-safety requirements, and applicable specifications.
Typical Application Context
- Crypto Mining Farms
- High-Rise Residential Buildings
- Hospital Central Energy Plants
- Hyperscale Data Centers
- Large Residential Subdivisions
- Commercial Building Substations
- Industrial Manufacturing Facilities
- Underground Power Distribution Networks
2500 kVA pad mounted transformer serving as the main power
supply for a large hospital campus.
Customize 2500 kVA Pad Mounted Transformer for Your Distribution Project
CHBEB provides configurable electrical, structural, protection, and documentation options to match project-specific distribution requirements.
- Electrical Ratings - Customize rated capacity, primary and secondary voltage, frequency, impedance, and tap configuration according to project requirements.
- Winding & Core Materials - Select copper or aluminum windings and suitable core materials according to required electrical performance and specifications.
- Protection & Enclosure - Configure fuse protection, bushing arrangements, cabinet access, and weather-resistant enclosure requirements.
- Mounting & Dimensions - Adapt pad-mounted dimensions, cable entry arrangements, compartment configuration, and other structural details to suit installation conditions.
- Testing & Documentation - Provide project-specific testing, technical drawings, nameplate information, and inspection documents according to customer or utility requirements.
- Branding & Packaging - Customize nameplates, labels, packaging marks, and shipping packaging according to branding and delivery requirements.

Quality Assurance & Testing by CHBEB for Transformer Manufacturing
CHBEB applies quality controls throughout production and testing to ensure consistent product quality and reliability.
Incoming Material Inspection
Check silicon steel core loss, insulation material thermal class, and other key material properties before production, with testing aligned with GB/T 2521 and IEC 60641.
01
Production Process Control
Control core lamination precision, winding quality, and turn-to-turn withstand voltage during manufacturing, following applicable JB/T 501 and IEEE C57.12.00 requirements.
02
In-Factory Quality Testing
Verify voltage ratio, winding resistance, load and no-load losses, impedance voltage, insulation resistance, withstand voltage, oil tightness, and other key parameters in accordance with applicable IEC 60076 and GB 1094.11 requirements.
03
Third-Party Testing
Support independent testing and certification through recognized organizations such as KEMA and CQC for applicable transformer projects.
04
Why Choose CHBEB as Your Transformer Manufacturer
CHBEB brings extensive experience and established manufacturing resources to transformer projects worldwide.
69+ Years of Manufacturing Experience
Founded in 1956, CHBEB has more than 69 years of experience in power and specialty transformer manufacturing, serving power transmission and distribution applications in different markets.
Three Self-Owned Manufacturing Bases
CHBEB operates three self-owned manufacturing bases: No. 211, Wei 16 Road, Yueqing, Zhejiang; Xiangyang Industrial Zone, Yueqing, Zhejiang; and No. 7, Xiangfeng Road, Jiangning District, Nanjing, Jiangsu. The facilities span over 100 acres with an annual production value of RMB 3 billion.
Engineering & Technical Support
CHBEB provides technical drawings and engineering support for transformer projects, allowing buyers to confirm electrical specifications, product dimensions, and installation requirements before production.
Green Manufacturing
CHBEB uses automated precision equipment to reduce material waste and energy consumption while integrating clean energy into its manufacturing facilities. Our supply chain also emphasizes responsibly sourced transformer materials.
Comprehensive Service Support from CHBEB for Your Transformer Projects
CHBEB provides practical support from technical evaluation and project coordination to delivery and after-sales service.
Technical Support & Free Design Drawings
CHBEB provides technical assistance and drawings to help customers confirm transformer specifications and equipment requirements before production.
Support includes:
• Free technical drawings for project evaluation
• Transformer specification and selection support
• Electrical and installation requirement consultation
• Product dimension and interface confirmation
• Responsive technical communication
Fast Production & Logistics Support
CHBEB coordinates production and shipment according to project schedules, product requirements, and delivery conditions.
Support includes:
• Standard lead time of 3–6 weeks
• Expedited delivery available within 1 week
• Production scheduling based on project requirements
• Export packaging for transformer transportation
• Shipping and logistics coordination
After-Sales & Lifecycle Support
CHBEB provides technical assistance and warranty coverage to support reliable transformer operation throughout its service life.
After-sales support includes:
• 3-year warranty for complete transformers
• 2-year warranty for spare parts
• Free lifecycle maintenance guidance
• Installation and commissioning guidance
• Technical troubleshooting and operation support
FAQ
Q: What information should I provide to request a quotation for a 2500 kVA pad mounted transformer?
A: Provide the required primary and secondary voltages, frequency, rated capacity, impedance, connection arrangement, and applicable standards. Project drawings, utility specifications, protection requirements, and delivery destination are also useful for preparing a more accurate quotation and identifying any non-standard requirements.
Q: Can CHBEB manufacture transformers that meet local utility approval requirements?
A: CHBEB can review the applicable utility specifications and project compliance requirements before confirming the proposed design. Buyers should provide the relevant approval documents, technical standards, and inspection criteria so that required design features and documentation can be evaluated before production.
Q: How can overseas buyers verify a transformer order before shipment?
A: Buyers can agree on the required inspection scope, test documentation, nameplate details, and acceptance criteria before production. Where required, third-party inspection can also be discussed in advance to help align shipment acceptance with the purchasing contract and project requirements.
Q: Can CHBEB coordinate export packaging and international delivery for large pad mounted transformers?
A: Yes. CHBEB can coordinate export packaging and shipping arrangements according to the transformer configuration, destination, and transportation requirements. Buyers should provide the delivery location, unloading limitations, and any packaging or shipping instructions early so these requirements can be considered during order planning.
Q: What should buyers confirm before approving a 2500 kVA pad mounted transformer for installation?
A: Buyers should confirm the transformer's electrical ratings, enclosure dimensions, cable entry positions, terminal interfaces, protection arrangement, and required installation clearances against the approved project drawings. Checking these details with the design team and installation contractor before production helps reduce the risk of site modifications and connection issues.
Hot Tags: 2500 kva pad mount three-phase oil-immersed distribution transformer, China 2500 kva pad mount three-phase oil-immersed distribution transformer manufacturers, suppliers, factory, 2500 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, 167 kva pad mount transformer, 5000 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, Single Phase Pad Mounted Transformer (URD Series), 1000 KVA Pad Mount Three-Phase Oil-Immersed Distribution Transformer, 25 kva pad mount transformer
