800 Kva Dry Type Transformer

800 Kva Dry Type Transformer

Details
• Rated Capacity: 800 kVA
• Rated Primary Voltage: 11 kV
• Cooling: AN, air-natural
• Temperature Rise: 100K
• Enclosure: IP23
• Engineering Support: Custom Configuration Available
Category
Dry Type Transformer
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

 

The 800 kVA Dry Type Transformeris designed for indoor medium-voltage power distribution, combining cast-resin insulation with a compact, oil-free structure. Its three-phase design supports stable power delivery, while configurable voltage ratings, cooling methods, and enclosure options allow CHBEB to match the transformer to site conditions and project requirements.

5

800 Kva Dry Type Transformer

 

 

 

Technical Specifications

 

Parameter

Standard Specification

Product Name

800 kVA Dry-Type Transformer

Transformer Type

Three-Phase Cast-Resin Dry-Type Distribution Transformer

Rated Capacity

800 kVA

Number of Phases

Three-phase

Rated Frequency

50 Hz

Rated Primary Voltage

11 kV

Rated Secondary Voltage

0.415 kV

HV Tapping Range

±2 × 2.5%, 5 positions

Tap-Changing Method

De-energized tap changing

Vector Group

Dyn11

Short-Circuit Impedance

6.0%

No-Load Current

≤1.3%

Cooling Method

AN, air-natural

Insulation Construction

Vacuum-cast epoxy-resin insulation with fully encapsulated HV windings

Winding Material

Copper

Core Material

Cold-rolled grain-oriented silicon steel

Thermal Insulation Class

Class F

Winding Temperature Rise

100 K

Partial Discharge Level

≤10 pC

Environmental / Climatic / Fire Class

E2, C2, F1

Enclosure Protection Degree

IP23

Temperature Monitoring

PT100 sensors, digital temperature controller, alarm and trip contacts

Installation

Indoor installation, continuous duty

Service Conditions

Maximum ambient temperature: 40°C; maximum altitude: 1,000 m

Certification Standards

Available according to IEC, IEEE/ANSI, UL, CSA, DOE (where applicable), CE/EN, UKCA, GOST/EAC, SASO/SABER, SONCAP, ISO, and other required certification schemes

 

 

 

Advantages of CHBEB 800 kVA Dry Type Transformer

 

CHBEB 800 kVA dry type transformers offer practical design options to meet electrical performance, insulation, and installation requirements across different projects.

Vacuum-Cast Resin Insulation

The high-voltage windings are vacuum-cast in epoxy resin to help minimize internal air voids and maintain insulation integrity. A specified partial discharge level of ≤10 pC, verified through factory testing, supports long-term electrical reliability.

Thermal Performance Options

The standard design uses Class F insulation with a 100 K winding temperature rise. An optional 80 K temperature-rise design can be specified for projects requiring lower winding operating temperatures, subject to the selected transformer configuration.

Integrated Temperature Monitoring

PT100 winding temperature sensors work with a digital temperature controller to monitor operating temperatures and support alarm and trip functions. This arrangement helps operators identify abnormal thermal conditions and respond before excessive temperatures threaten transformer operation.

1
Cast Resin Coil Winding Assembly for 800 kVA Dry Type Transformer
2
Overhead Crane Lifting and Handling of 800 kVA Dry Type Transformer
3
Schematic Diagram of the Structure of a 800 kVA Dry-Type Transformer

 

 

 

Typical Application Context

 

  • Industrial manufacturing facilities
  • Commercial and office buildings
  • Hospitals and healthcare facilities
  • Data centers and IT infrastructure

 

  • Airports, metro stations and public buildings
  • Educational campuses
  • Renewable energy support systems
  • Indoor substations and distribution rooms

1

800 kVA dry type transformer powering critical healthcare

facilities and hospital substations.

 

 

 

Customize 800 kVA Dry Type Transformer for Your Power Distribution Project

 

CHBEB provides configurable electrical, winding, cooling, protection, and documentation options to match project-specific power distribution requirements.

 

  • Electrical Ratings - Customize primary and secondary voltage, frequency, impedance, vector group, and tap configuration according to project requirements.
  • Winding & Core Materials - Select copper or aluminum windings and suitable core materials according to required electrical performance and operating conditions.
  • Cooling Configuration - Configure natural air or forced-air cooling according to the required load capacity, installation conditions, and operating requirements.
  • Insulation & Protection - Configure cast-resin insulation, temperature monitoring, enclosure protection, and other electrical protection requirements for the intended installation environment.
  • Dimensions & Installation - Customize overall dimensions, terminal arrangements, enclosure configuration, and other structural details to suit available installation space and system connections.
  • Testing & Documentation - Provide project-specific testing, technical drawings, nameplate information, and inspection documents according to customer or project requirements.

 

Discover More Custom Options Customize Your Transformer

Customation

 

 

 

Quality Assurance & Testing by CHBEB for Transformer Manufacturing

 

CHBEB applies quality controls throughout material inspection, production, and final testing to maintain consistent performance and reliability for dry type transformers.

 

Incoming Material Inspection

Inspect silicon steel core materials, winding conductors, cast-resin insulation materials, and other key components before production. Material properties are verified against applicable GB/T and IEC requirements to ensure consistent input quality.

01

Production Process Control

Monitor core lamination, winding dimensions, insulation application, and cast-resin curing throughout manufacturing. Key process controls help maintain dimensional accuracy, insulation integrity, and consistent winding quality for dry type transformers.

02

In-Factory Quality Testing

Perform voltage ratio, winding resistance, load and no-load loss, impedance voltage, insulation resistance, withstand voltage, and partial discharge tests according to applicable IEC 60076 and GB 1094 standards. These tests verify the transformer's electrical performance and insulation condition before shipment.

03

Third-Party Testing

Support independent testing and certification through recognized organizations such as KEMA and CQC for applicable transformer projects, providing additional verification for project-specific quality and compliance requirements.

04

 

 

 

R&D Innovations in CHBEB Dry Type Transformer Manufacturing

 

CHBEB dry type transformers incorporate advanced R&D engineering to deliver maximum operational reliability and performance across demanding industrial environments.

Low-Loss Design

CHBEB optimizes magnetic circuit design and uses high-performance silicon steel sheets to improve the efficiency of dry type transformers. These technologies enable no-load losses to be reduced by 15–20% and load losses by 10–15%, helping lower energy consumption during long-term operation.

High Reliability Design

CHBEB develops reinforced winding, insulation, and structural designs to withstand demanding electrical and mechanical conditions. Its dry type transformers have passed short-circuit, overload, and vibration tests, with an annual product failure rate of less than 0.05%, supporting stable and reliable long-term operation.

High-Temperature Tolerance

CHBEB develops optimized winding and insulation systems for stable performance under elevated temperatures. Enhanced thermal design enables dry type transformers to maintain reliable operation at 95°C for 1,000 hours, supporting consistent electrical and insulation performance in high-temperature environments.

Material Innovation

CHBEB applies high-quality silicon steel sheets and advanced insulation materials to improve the electrical, thermal, and mechanical performance of dry type transformers. These material innovations can extend service life by 20–30% and increase efficiency by 5–8%, supporting more durable and energy-efficient operation.

 

 

 

Comprehensive Service Support from CHBEB for Your Transformer Projects

 

CHBEB provides practical support from technical evaluation and project coordination to delivery and after-sales service.

Technical Support & Free Design Drawings

CHBEB provides technical assistance and drawings to help customers confirm transformer specifications and equipment requirements before production.
Support includes:
• Free technical drawings for project evaluationa
• Transformer specification and selection support
• Electrical and installation requirement consultation
• Product dimension and interface confirmation
• Responsive technical communication

Fast Production & Logistics Support

CHBEB coordinates production and shipment according to project schedules, product requirements, and delivery conditions.
Support includes:
• Standard lead time of 3–6 weeks
• Expedited delivery available within 1 week
• Production scheduling based on project requirements
• Export packaging for transformer transportation
• Shipping and logistics coordination

After-Sales & Lifecycle Support

CHBEB provides technical assistance and warranty coverage to support reliable transformer operation throughout its service life.
After-sales support includes:
• 3-year warranty for complete transformers
• 2-year warranty for spare parts
• Free lifecycle maintenance guidance
• Installation and commissioning guidance
• Technical troubleshooting and operation support

 

 

 

FAQ

 

Q: Can CHBEB manufacture an 800 kVA dry type transformer to replace an existing unit?

A: Yes. CHBEB can review the existing transformer's nameplate, electrical ratings, dimensions, and terminal arrangements to assess replacement compatibility and identify any required design modifications.

Q: Does CHBEB accept orders for a single 800 kVA dry type transformer?

A: Yes. CHBEB supports orders starting from one unit, making it possible to procure an individual transformer for equipment replacement, facility upgrades, or project-specific requirements.

Q: Can CHBEB arrange third-party inspection before shipment?

A: CHBEB can coordinate third-party inspection for applicable projects. Buyers should confirm the inspection agency, test scope, acceptance criteria, and documentation requirements before production.

Q: Can CHBEB provide a customized transformer design before order confirmation?

A: CHBEB provides technical drawings and specification support to help buyers review dimensions, connection interfaces, and electrical requirements before approving the final design for manufacturing.

Q: What warranty does CHBEB provide for the 800 kVA dry type transformer?

A: CHBEB provides a three-year warranty for the complete transformer and a two-year warranty for spare parts. Technical troubleshooting and lifecycle maintenance guidance are also available to support ongoing operation.

 

 

Hot Tags: 800 kva dry type transformer, China 800 kva dry type transformer manufacturers, suppliers, factory, 1000 Kva Dry Type Transformer, 225 kva dry type transformer, dry type power transformer, air insulated dry type, cast coil dry type transformer, air cooled transformer dry type

Powering the World with Premium Transformer Solutions

As a leading Chinese transformer manufacturer with decades of expertise, CHBEB proudly serves clients across 17 countries and counting. Our global footprint expands continuously as we:

  • Deliver customized power solutions for more than 10 international projects
  • Support over 20 trusted distributors worldwide
  • Manufacture reliable low-voltage transformers with 60+ years of technical excellence

Let's energize your next power project with Chinese precision and global reliability.

Get in Touch with CHBEB

Leave a message for more information about our products series, and request a quote or expert advice.